Product Details:
Usage/Application | Industrial |
Material | SS/MS |
Voltage | 240 V |
Power Source | Electric |
Frequency | 50 Hz |
Power | 300 HP |
As per Customers enquiry- dimensions price will be vary.
Thermotech Specialize In Design And Manufacture Of Agitators For Various Applications. Backed With Years Of Experience,weHave Supplied More Than 8000 Agitators Ranging Up To300hp. Our Engineers Have Many Years Of Experience InMechanical Design And In Manufacturing Agitators Of AllSizes.Approved By Consultants Like Kpg, Uhde, Mecon, Dalal- Mots, Chempro, Bax-council, Shroff & Associates,Ongc, Barc, Tdc And Hpcl, TheConstruction Of Thermotech Agitators Has Been StandardizedTo A High Degree Of Quality And Reliability.
We Use The Most Modern Technology And Design In TheManufacture Of All Types Of Agitators Like –
- Top Entering - Over Hung Shaft
- Bottom Entering - Stub Shaft
- Side Entering - Are Used For Low Viscosity Blending
- Application
- Inclined Mounting - Portable With Driven Clamp On
Impellers: Selection Of The Correct Process Hp For Any Fluid MixingApplication Is Of Obvious Importance. There Can Be A “correct”Hp Only In Combination With A Specific Type, Size (D/t Ratio),Quality And Positions(S) Of Mixing Impeller. No One ImpellerDesign Has Such Outstanding Capabilities As To Be ThePreferred Type For A Preponderant Majority Of Fluid MixingApplications. To Apply Mixer For Optimum Results Requires ASound Knowledge Of All Practical Types Available As Well As TheLimits For Their Capabilities.
- Hydrofoils Designs Are Conventionally Low Shear High FlowImpellers.hydrofoils Are Ideal For Operation Like Blending,Ph Control, Dissolution, Dilution, Mixing, Solid Suspension,Washing Etc.
- Turbine With Flat Vertical Blades Extending To The Shaft IsSuited To The Vast Majority Of Mixing Duties Upto 1,00,000Cp. Or So At High Pumping Capacity.
- Turbine With Blades Are Inclined 45. Construction With Two To Eight Blades Are Used, Combined Axial And Radial Flow One Achieved.
- The Horizontal Plate To Which The Impeller Blades Of This Turbine Are Attached Has A Stabilizing Effect.
- Curved Blades Turbines Effectively Disperse Fibrous MaterialsWith Out Fouling.
Pressure: The Thermotech Model Is Designed For Use On The MoreSensitive Closed Tank Operations In The Chemical,Pharmaceutical And Food Processing Industries. The DoubleMechanical Seals Utilized Are Designed For Top And BottomEntry Of Pressure Vessels. Special Units Have Been Supplied ToMeet The Most Rigorous Operating Requirements Of Process Industries.
Non-pressure: The Standard Stuffing Boxes Shown Are Designed To OperateWith Vessel Pressures Ranging From Full Vacuum To 10 Bar,Temperatures To 2000c.and Above Depending Up On EffectiveRange Of Packing Type Required For Process Conditions.Optional Water Cooled Stuffing Boxes Are Supplied WhereNeeded